Mod PodgeMod PodgeGlue · Sealer · Finish

Spray sealers: clear acrylic over a finished decoupage project

Mod Podge clear acrylic spray sealer over a finished decoupage project — matte, satin or gloss, with no brush on the surface.

An aerosol reaches into carving, lace and deep texture where a brush would only bridge across the top, and it leaves no bristle marks at all. We make clear acrylic sealers in matte, satin, gloss and super gloss.

Build the coat in thin passes and let each one flash off before the next — a heavy pass runs. Spray outdoors or with a window open; this is the one part of the line that is not a kitchen-table product.

Every can on this shelf

Not sure this is your shelf? Our surface chart, written out walks through which of our formulas we have tested on which material, and the other eleven shelves are one click away.

Mod Podge clear acrylic spray over a finished project

A brush gives you control and a slightly thicker build. An aerosol gives you something a brush cannot: an even coat with no brush strokes, reaching into carving, lace, texture and anywhere a bristle would bridge over instead of settling in.

We use these as the last step rather than the only one. Glue the design down with a brush-on decoupage glue, let it dry, then build two or three light spray passes over the top. Light passes matter — one heavy pass runs, three light ones do not.

Spray outdoors or with a window open, keep the can moving, and let each pass flash off before the next. The sheens match our brush-on line, so a matte spray over a matte project looks like one finish rather than two.

When we reach for a can instead of a brush:

  • carved wood and anything with deep texture
  • lace, dried flowers and paper that a brush would tear
  • large flat surfaces where strokes would show
  • sealing the inside of a planter
  • a final clear coat over acrylic paint

Questions we get about this shelf

Can I spray over brush-on Mod Podge?

Yes, and that is the combination we use most. Let the brushed coat dry properly first.

How many passes?

Two or three light ones. Judge it by coverage, not by how wet the surface looks — a surface that looks wet is already too heavy.

Indoors or outdoors?

Outdoors or in a room with real airflow. Aerosol overspray settles on everything within a couple of feet.

The other eleven shelves